;

List of products by manufacturer Astral Pool

Suppliers of products and accessories for swimming pools.

Manufacturers and distributors for residential, commercial and spa pools.

More
  • Manual multiport valves with six channels to carry out different functions in an hydraulic circuit. Its design, basically functional, offers a wide range of possibilities of connection to any installation, assuring perfect water-tightness and comfortable handling.

  • Specially designed to support high working pressures and connection to large filters which require special connections. Choose from the models offered: 2 ½'', 3'' and 4'' multiport valves.

  • Manufactured in Polyester resin and fibreglass. Total capacity 33 liters. Drilled flanges according to DIN-2501 regulation. Band type closure. Drain plug. 1.5 bar maximum operating pressure. Hole mesh diameter: Ø 4,9 mm

  • Manufactured in polyester resin and fibre glass. Total capacity of 33 liters. Sight-glass lid to check stariner. Drilled flanges according to DIN-2501 regulation. Band type closure. Drain plug. 1.5 bar maximum operating pressure. Hole mesh diameter: Ø 4,9 mm

  • Manufactured in polyester resin and fibre glass. Total capacity of 60 liters. Drilled flanges according to DIN-2501 regulation. Band type closure. Drain plug. 1.5 bar maximum operating pressure. Hole mesh diameter: Ø 4,9 mm

  • Manufactured in polyester resin and fibre glass. Total capacity of 60 liters. Sight-glass lid to check stariner. Drilled flanges according to DIN-2501 regulation. Band type closure. Drain plug. 1.5 bar maximum operating pressure. Hole mesh diameter: Ø 4,9 mm

  • Air pump designed for spas, baths, hydromassage installations and similar which produces a constant stream of air bubbles at medium and high air volume levels. It can also be used to stir up the filter bed, for example in back wash cycles where a low intensity air current is required.

  • The ALASKA PLUS pump range PUMP introduces a new hydraulic design that gives you an excellent noise performance while it is working at standard conditions.

  • ALASKA PUMP SPECIFICATIONS - PRODUCT AND ACCESSORIES DESCRIPTION hp, and are provided with single-phase motors. 

  • Flanges in galvanized steel. Elastic material: polychloroprene. Maximum temperature: 95ºC. Nominal pressure: 10 kg/cm2 (PN/10). PN/16 can be provided under command.

  • - 1450 r.p.m. centrifugal pump.- Pump housing, impeller and diffuser made in cast iron.- AISI-316 stainless steel shaft.- Mechanical seal in AISI-316 stainless steel.- IP-54 protection grade.- Isolation level Class F (enables it to tolerate internal temperatures of up to 155ºC).

  • - 3000 r.p.m. centrifugal pump.- Pump housing, impeller and diffuser made in cast iron.- AISI-316 stainless steel shaft.- Mechanical seal in AISI-316 stainless steel.- IP-54 protection grade.- Isolation level Class F (enables it to tolerate internal temperatures of up to 155ºC).- 11 litres capacity cast iron prefilter included.- AISI-304 stainless steel...

Showing 1 - 12 of 57 items